Snack Sealer

Snack Sealer Mini Plastic Bag Sealer Machine Storage Bag Clip Sealing Machine Portable Sealer Packing Seal for Food Snack Kitchen Gadgets

The Snack Sealer is a handy kitchen device that creates a sealed airtight barrier to keep snacks fresher for longer.

Its easy-to-use design helps you reseal chip bags, food storage containers, and other snacks in just seconds.

Purpose:

Keep food fresh and dry.

Features:

Simple and fast operation. With the latest technology, this handheld food saver is very easy to use and does not require preheating. When the cover is pressed, the high-efficiency and low-loss heating film will immediately reach the sealing temperature. Place the bag to be sealed in the middle, and then slide it along the edge of any bag at a slow and constant speed to achieve an air-tight seal. Not suitable for pure paper bags and pure aluminum bags.

Instructions:

nsert 2 AA batteries (batteries not included)
Unlock the safety/protective cover to the down position
Press the sealing machine to preheat for 5-7 seconds
The surface of the bag required for flattening is sealed along the edge
Place the plastic sealer on the bag and press down firmly
When pressed, move moderately from one end to the other
Finally loosen the protective cover, and then move it back to the up position

Specification:

Material: high-quality ABS material, resistant to high and low temperatures. Non-toxic and durable
size: 9.7cm*3cm
Color: Pink/Blue/white.
Battery: 1.5V, 2 AA batteries, only alkaline batteries (not included) can be used.

User Manual

1. The machine will not create heat on its own after brand new batteries have been put. To ensure a progressive increase in heat, press it for three to five seconds.
2. Kindly utilize fresh batteries. Make sure the batteries have the same polarity. Check if the batteries are inserted correctly. Otherwise the machine cannot produce heat in any other way.
3, After the batteries have been properly installed, press the machine for 3 to 5 seconds. After that, the machine will begin to produce heat.
4. To ensure optimal sealing performance, kindly move thick plastic bags gently between the machines so that the heat can distribute evenly.
5. You can leave the batteries in place. To prevent the two metal portions from making contact with one another after use, just move the hook between them.

Tip: don't push the machine too hard. If not, the hot metals can fracture and distort. The sealing plastic bag must be dry and free of water and oil.